Skip to content

Wiggly Lines At Corners

Description

A wavy 'ringing' pattern in places where direction changes suddenly and at high speed. .

Solution

This is typically a result of inertia/speed combined with some play or slop in your machine's mechanics. Check out our page on Mechanical Issues for more info.

If you are using a Galvo laser, you may need to adjust your Jump settings:

  • If you did not import the markcfg7 file from the EZCAD configuration folder that came with your laser when you first set up your device profile, do so now.
  • If you already imported the configuration file, try decreasing Jump Speed and increasing Min Jump Delay and Max Jump Delay.

For more help using LightBurn, please visit our forum to talk with LightBurn staff and users, or email support.